Choosing doors ·

Pivot, pin or cup hinge?

The hinge decides more than how a door opens. It shapes the line of the frame, what the cabinet needs to carry, and how the door is fitted on site. Here is how the three hinge types in our 2026 collection compare.

Ten-door wardrobe run with Arco GM149 aluminum frame glass doors, some doors open
Arco GM149 glass doors on top and bottom pivot hinges. Rendering; interior fittings shown for context and supplied separately.

Three ways to hang an aluminum frame door.

Every door in the Gainer 2026 collection is supplied as an assembled leaf with its handle and a matching hinge set. Which hinge comes with it depends on the door system:

  • Top and bottom pivot hinges — the door turns on a pin at its top and bottom corners.
  • Pin hinges — a slim pin-type hinge fitted along the hinge side of the door.
  • Concealed cup hinges — the familiar cabinet hinge, mounted inside the cabinet and hidden when the door is closed.

None is simply better. Each suits a different look, cabinet construction and installation routine.

Pivot hinges: the cleanest frame line.

With a pivot hinge, the fixing points sit at the top and bottom of the door rather than along its side. Nothing interrupts the long edge of the frame, which is why pivots suit slim-framed glass doors where the frame line is the design.

In the 2026 collection, the JL002-L / JL002-R top and bottom pivot is the catalogue hinge forFilo GM148 (20.8 mm frame),Arco GM149 andLinea GM150 (35 mm frames) andListello GM147 (30 mm wood-look frame).

Because the pivots fix into the top and bottom of the opening, the cabinet top and base must be able to take them. Confirm this early, especially when you are replacing doors on existing cabinets.

JL002-L / JL002-R top & bottom pivot for the Arco GM149 door, catalogue drawing
JL002-L / JL002-R top and bottom pivot for Arco GM149. Catalogue drawing, not a production drawing.

Pin hinges: slim, for glass and bonded panels.

A pin hinge keeps the hardware compact on the hinge side of the door. In our catalogue it is the RY-ZSJL-L3-A pin hinge, used onPerno GM152 with 4 mm glass and onTessa GM153, where fabric or a leather-look finish is applied to a glass substrate.

Choose a pin-hinged door when you want a glass or textile front with discreet hardware, and the cabinet sides are suitable for side-mounted fittings.

RY-ZSJL-L3-A pin hinge for the Perno GM152 door, catalogue drawing
RY-ZSJL-L3-A pin hinge for Perno GM152. Catalogue drawing, not a production drawing.
Ten-door wardrobe run with Perno GM152 pin-hinged glass doors in Euro grey glass
Perno GM152 with Euro grey glass on pin hinges. Rendering; interior fittings shown for context and supplied separately.

Cup hinges: the cabinet maker’s standard.

Concealed cup hinges are the hinge most cabinet workshops and installers already work with. They mount inside the cabinet, disappear when the door is closed and are typically adjusted after mounting to align the doors.

Netto GM151 uses a BLUM concealed cup hinge.Quadro GM146 andPietra GM125 use the BLUM 110° concealed cup hinge.Filo GM148 also lists a Hettich concealed cup-hinge option alongside its pivot.

If your production line is already set up around cup hinges, these models will feel the most familiar on site.

BLUM concealed cup hinge for the Netto GM151 door, catalogue drawing
BLUM concealed cup hinge for Netto GM151. Catalogue drawing, not a production drawing.
GM146 construction sample: frame, panel and handle details. GM146 hangs on BLUM 110° concealed cup hinges.

Hinges by model.

The full list from the current catalogue. Maximum leaf sizes are catalogue limits; sizes outside them need a separate review.

Hinges by model · 2026 collection catalogue
ModelHinge in the catalogueDoor thicknessMax. leaf (W × H)
Filo GM148JL002-L / JL002-R pivot hinge; Hettich cup hinge25 mm600 × 2700 mm
Arco GM149JL002-L / JL002-R pivot hinge25 mm600 × 2700 mm
Linea GM150JL002-L / JL002-R pivot hinge25 mm600 × 2700 mm
Listello GM147JL002-L / JL002-R pivot hinge30 mm600 × 2400 mm
Perno GM152RY-ZSJL-L3-A pin hinge25 mm600 × 2700 mm
Tessa GM153RY-ZSJL-L3-A pin hinge25 mm600 × 2700 mm
Netto GM151Blum cup hinge25 mm600 × 2700 mm
Quadro GM146Blum 110° cup hinge25 mm600 × 2700 mm
Pietra GM125Blum 110° cup hinge22 mm600 × 2700 mm

The catalogue shows the hinge family. The exact hinge model and mounting plate follow the confirmed cabinet and fitting specification.

Four questions before you choose.

  1. New or existing cabinets? For replacement doors, tell us which hinges and mounting plates are fitted now, and send a photo of the cabinet top, base and side.
  2. What should the frame look like? For an uninterrupted slim frame, start with a pivot-hinged model such asFilo GM148.
  3. What surface? Glass works with all three hinge types. Fabric and leather-look fronts are available asTessa GM153 (pin hinge) orQuadro GM146 (cup hinge). Sintered stone isPietra GM125 (cup hinge).
  4. Who installs? If your team already fits cup hinges every day, that may decide it.

For opening sizes, door counts and opening sides, see ourmeasuring and cabinet fit guide.

Ten-door wardrobe run with Netto GM151 glass doors on concealed cup hinges
Netto GM151 with polished champagne frames and Euro grey glass on concealed cup hinges. Rendering; interior fittings shown for context and supplied separately.

Not sure which hinge fits?
Send us the cabinet.

Share your opening sizes, door count, opening sides and a photo or drawing of the cabinet. If you are replacing doors, tell us the hinges fitted now. We will suggest a suitable model and hinge, and confirm the details with your quotation.

Direct contact: +86 185 6600 3733. Your WhatsApp enquiry opens as a draft; send it in WhatsApp to reach our team.

WhatsApp